Description
The fischer Aircrete anchor FPX-I is made of zinc-plated steel. After pre-drilling, the FPX-I is only driven in with the hammer. It is not necessary to clean the drill hole. The fischer Aircrete anchor is applied with a hex driver via a cordless screwdriver or via a ratchet. The cone is then pulled into the expansion sleeve. In this case the four wings create an undercut in the drill hole. After expansion, the hex socket is automatically released. The fischer Aircrete anchor FPX-I is ideally suited for fixing suspended ceilings, railings or kitchen cabinets in aerated concrete.
One setting tool is included Per pack..
Applications
- Suspended ceilings
- Cable trays
- Pipelines
- Ventilation ducts
- Guard rails/hand rails
- TV consoles
- Kitchen cupboards
- Stand-off installation
| Type | Art.-No. | Drill diameter | Min. drill hole depth for pre-positioned installation | Anchor length | Effect. anchorage depth |
|---|---|---|---|---|---|
|
d0
|
h1
|
l
|
hef
| ||
| [mm] | [mm] | [mm] | [mm] | ||
| FPX M6-I | 519021 | 10 | 95 | 75 | 70 |
| FPX M8-I | 519022 | 10 | 95 | 75 | 70 |
| FPX M10-I | 519023 | 10 | 95 | 75 | 70 |
| FPX M12-I | 519024 | 10 | 95 | 75 |
70
|
Functionality
- The FPX-I with internal thread is suitable for pre-positioned installation.
- Pre-drilling enables easy hammering in, even in high-strength aerated concrete. There is no need to clean the drill hole.
- When the anchor is tightened with the hexagon wrench, the internal thread sleeve starts to rotate and the cone is pulled into the square expansion sleeve. The aerated concrete is compressed on the four sides and generates an undercut in the drill hole.
- When reached the optimum expansion, the hexagon wrench is released automatically from the anchor.
