Description
Versions
- zinc-plated steel
Building materials
Approved for:
- Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications
Also suitable for:
- Solid sand-lime brick
- Natural stone with dense structure
- Prestressed hollow-core concrete slabs
Advantages
- The special active principle allows for a simple hammerset installation and, therefore, a short processing time.
- The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation.
- The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations.
- The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
- A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use.
| Type | Art.-No. | Drill hole diameter | Anchor length | Inner diameter of the hook/eye |
|---|---|---|---|---|
| [mm] | [mm] | [Ø mm] | ||
| FNA II 6 x 25 H | 044126 | 6 | 54 | 10 |
| FNA II 6 x 25 OE | 044127 | 6 | 54 |
10
|
Functioning
- The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and push-through installation. The FNA II OE and H are suitable for pre-positioned installation.
- The installed FNA II nail anchor expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall.
- Available setting tools:
FNA S-SBO to slip onto the drill,
FNA S-SDS for series installation with a drilling hammer,
FNA S-H for the manual installation of mounting rails.
