Description
Applications
- Fire protection plates
- Fire protection boards
- Ventilation systems
- Wire and nonious hangers
- Mounting rails
- Metal clamps
- Substructures made of wood and metal
Versions
- zinc-plated steel
- stainless steel (Please Call for prices)
- highly corrosion-resistant steel (Please Call for prices)
Building materials
Approved for:
- Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications
Also suitable for:
- Solid sand-lime brick
- Natural stone with dense structure
- Prestressed hollow-core concrete slabs
Advantages
- The special active principle allows for a simple hammerset installation and, therefore, a short processing time.
- The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation.
- The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations.
- The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
- A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use.
Galvanized
| Type | Art.-No. | Drill hole diameter | Anchor length | Max. fixture thickness |
|---|---|---|---|---|
| [mm] | [mm] | [mm] | ||
| FNA II 6 x 25/5 | 044121 | 6 | 35 | 5 |
| FNA II 6 x 30/5 | 044115 | 6 | 40 | 5 |
| FNA II 6 x 30/30 | 044116 | 6 | 65 | 30 |
| FNA II 6 x 30/50 | 044117 | 6 | 85 | 50 |
| FNA II 6 x 30/75 | 044118 | 6 | 110 | 75 |
| FNA II 6 x 30/100 | 044119 | 6 | 135 | 100 |
| FNA II 6 x 30/120 | 044120 | 6 | 155 | 120 |
stainless steel A4 (Please Call for prices)
| Type | Art.-No. | Drill hole diameter | Anchor length | Max. fixture thickness |
|---|---|---|---|---|
| [mm] | [mm] | [mm] | ||
| FNA II 6 x 30/5 A4 | 044122 | 6 | 40 | 5 |
| FNA II 6 x 30/30 A4 | 044123 | 6 | 65 | 30 |
| FNA II 6 x 30/50 A4 | 046024 | 6 | 85 | 50 |
highly corrosion-resistant (Please Call for prices)
| Type | Art.-No. | Drill hole diameter | Anchor length | Max. fixture thickness |
|---|---|---|---|---|
| [mm] | [mm] | [mm] | ||
| FNA II 6 x 30/5 C | 044124 | 6 | 40 | 5 |
| FNA II 6 x30/20 C | 506147 | 6 | 55 | 20 |
| FNA II 6 x 30/30 C | 044125 | 6 | 65 | 30 |
| FNA II 6 x 30/50 C | 500569 | 6 | 85 | 50 |
| FNA II 6 x 30/75 C | 500573 | 6 | 110 | 75 |
| FNA II 6 x 30/100 C | 500574 | 6 | 135 | 100 |
| FNA II 6 x 30/120 C | 500575 | 6 | 155 |
120
|
Functioning
- The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and push-through installation. The FNA II OE and H are suitable for pre-positioned installation.
- The installed FNA II nail anchor expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall.
- Available setting tools:
FNA S-SBO to slip onto the drill,
FNA S-SDS for series installation with a drilling hammer,
FNA S-H for the manual installation of mounting rails.
