Description
The Type F9 girder clamp is used to achieve a fast steelwork fixing connection between two steel beams or other steel sections which run parallel with each other and where the flanges are of the same width. The clamp can be used with bolts or threaded rod and does not require a location plate making it a simple and cost effective solution. Suitable for use only on parallel flanges and applications with low tensile loadings. Manufactured from malleable iron and available with a hot dip galvanised or zinc plated finish to provide high performance and anti-corrosion protection.
Material:
Malleable Iron
Finish:
Bright Zinc plated
| Product Code | Safe Working Loads | Dimensions | |||||||
|---|---|---|---|---|---|---|---|---|---|
| with Bolt | without Bolt | Bolt 8.8 Z | Tensile / 1 Bolt (FOS 5:1) | Tightening Torque* | Clamping Range V | Y | J | X | Width |
| kN | Nm | mm | mm | mm | mm | mm | |||
| F910NC | F910NB | M10 | 2.0 | 20 | 19 - 42 | 25 | 13 | 19 | 24 |
| F912NC | F912NB | M12 | 2.8 | 39 | 26 - 60 | 35 | 17 | 24 | 30 |
| F916NC | F916NB | M16 | 5.6 | 93 | 29 - 69 | 43 | 21 | 28 | 35 |
| F920NC | F920NB | M20 | 8.4 | 177 | 32 - 82 | 51 | 25 | 35 | 44 |
