PAK Marker Spray Can 500ml

Properties of the Pak Spray

• PAK Detector is a white marking paint that contains a specific solvent to dissolve the PAH, causing a colour change to yellow.
• The PAK Spray can allow you to identify the presence of PAH in tar at levels of 100 ppm and above.
• It does not provide an official measurement but merely an indication of the presence of tar in the asphalt.
• Drying time: approximately 15 min.
• Temperature range: -10°C to 50°C.

Specifications of the Tar Detector 

Composition of the Pak Spray

Binder: acrylic.
Pigments: mineral and organic.
Solvents: specific to dissolve the PAH.
Propellant: specific blend of isobutane and propane.

Marker is especially developed to detect Polycyclic Aromatic Hydrocarbons.

Certain asphalts containing tar and those laid back in the ‘80s and ’90s contain compounds that are today prohibited as they can cause health problems for those who handle or are in contact with them.

It is therefore important to know whether these are present when maintenance has to be carried out, in order to isolate them from other waste. This identification can be carried out by detecting the PAH strongly present in the tar.

Clean the material that is to be tested and ensure that the surface isn't too moist. Best results are obtained when the aerosol and the material to be tested are both at room temperature.

 

Shake the spray can for a few minutes and then spray a layer of the white spray onto the test material. Let the spray dry.

 

If there are PAKs (Polycyclic Aromatic Hydrocarbons) present in the material there will be a yellowish/light brown discolouration showing in the white sprayed area. If the discolouration is clear then you can assume that the examined material has more than 150ppm of Polycyclic Aromatic Hydrocarbons present.

 

If there is any doubt of visible discolouration then an Ultra Violet lamp may be used. Under Ultra Violet light the parts with PAKs present will show up as a yellow/green color. This test is best carried out in a dark environment or in a UV-box.

See BM506 Ultra Violet Lamp.